My console keeps beeping and I'm not sure how to stop it.

If your console gives a set of three beeps over and over again, you may have inadvertently set an alarm. Follow these steps on the console to clear alarms.

  1. Press ALARM to enter alarm mode. The ALARM and HIGHS icons appear.
  2. Select the alarm setting you wish to clear.
  3. Press 2ND, then press and hold CLEAR until the setting changes to all dashes. You have cleared the alarm setting.
  4. Press DONE to exit Alarm Mode.

These steps will clear the any High alarms that have been set. To clear any Low alarms, follow the steps below.

  1. Press ALARM to enter alarm mode.
  2. Press the High/Low button to display low alarms.
  3. Select the alarm setting you wish to clear.
  4. Press 2ND, then press and hold CLEAR until the setting change to all dashes. You have cleared the alarm setting.
  5. Press DONE to exit Alarm Mode.

Note: To clear all alarms, enter Alarm mode (press and release the ALARM key), then press and hold the ALARM key until all the fields become dashed.


How well did this answer your question?


Powered by HelpDocs