How do I reboot my WeatherLink Console?
There are several ways to reboot the WeatherLink Console Use a SIM Insertion tool, or a straightened-out paper clip.
Soft Reboot:
1. Insert a paperclip in the “R” hole on the back of the console and hold for more than 1 second.
2. Release the button and you should see the screen restart.
Hard Reboot (both achieve the same results)
Hard Reboot (Option 1):
1. Remove the USB cable from the back of the console.
2. Insert a paperclip in the “P” hole on the back of the console.
3. Press and hold until you see the menu on the front showing Power off.
4. Select “POWER OFF”.
5. Wait for 2 minutes.
6. Then reconnect the USB power cable. The unit should power back up.
Hard Reboot (Option 2):
1. Remove the USB cable from the back of the console.
2. Insert a paperclip in the “P” hole on the back of the console.
3. Press and hold for greater than 8 seconds and until you see the screen turn completely off
4. Wait for 2 minutes. Then reconnect the USB power cable. The unit should power back up.
Related Questions answered by this article:
- My WeatherLink mobile app is missing its graph data. How can I restore my graph data to my WeatherLink mobile app? I use a WeatherLink Console to send data to WeatherLink.com
To restore graph data to your WeatherLink Mobile app, please reboot the WeatherLink Console using the above instructions, giving it 24 hours between each reboot type to allow the data to populate.
