How do I communicate directly with my WeatherLinkIP data logger?

It should be as simple as connecting on TCP port 22222 and sending serial commands. You do need to ensure you use a raw TCP connection with no higher level protocol. It will momentarily refuse the connection if it is actively uploading to that moment, but if you retry in a few seconds it should work. Please note that in order to allow the IP logger to send to, you must release the TCP socket for about 5 seconds once per minute for the current conditions (loop packet) to be sent and about 60 seconds once per hour for the archive records to be sent up.

How well did this answer your question?

Powered by HelpDocs (opens in a new tab)