Can I reset the IP address of my Weatherlink IP datalogger?

Setting the IP address of the Weatherlink IP data logger to "Static" means it's limited to one specific address. When changes are made to the network, sometimes the IP data logger won't connect because it's stuck on the old "Static" IP that no longer exists. To get around this there are some instructions on spoofing the IP to an address you want it to be.

Lets try FORCING it to another IP. the IP address you want001D0A002325= the Device ID (DID)

Click Start, click All Programs, and then click Accessories.Right-click Command prompt, and then click Run as administrator.If the User Account Control dialog box appears, confirm that the action it displays is what you want, and then click Continue.

arp -s 00-1D-0A-00-23-25(That is arp{space}-s{space}{space}00-1D-0A-00-23-25)Do you see any messages? You should not typically.

ThenPing should see 1 fail, and 3 successful pings ThenPing should see 4 successful pings.

This will confirm that the IP took

How well did this answer your question?

Powered by HelpDocs (opens in a new tab)

Powered by HelpDocs (opens in a new tab)