Vantage Pro2 Wireless Console Firmware, Direct PC Install 3.15 Windows (FIRMWARE)
RELEASE DATE: 27/03/2014
Before You Install
IMPORTANT! This firmware is only for Vantage Pro2 Wireless Consoles manufactured April 2006 or later (#6312). The Inside Temp, Inside Hum, and Barometer readings will not appear if version 3.15 firmware is installed on consoles manufactured before April 2006.
Firmware version 3.15
- Minor improvements in firmware efficiency.
Firmware version 3.12
- Fixed a bug in 3.00 that did not allow the ET alarm to be cleared.
- Eliminates occasional WeatherLink communication issue when console is busy receiving a radio packet.
Firmware version 3.00
- Console timesout of the "Receiving From" setup screen after 15 min using batteries and 30 min using AC power.
- Previous versions of firmware allowed a negative ET, now it will clip hourly ET values at 0.
- Added leading zero to temp readings between -1.0 and 1.0.
- Improved temp and hum index calculations.
- Low humidity readings now clipped at 1% and will not show 0%.